| Goped Garage your NUMBER ONE source for Personal Watercraft Repairs ** Free estimates available** At Goped Garage, we can take care of your jet ski tune ups, troubleshooting, pump servicing, winterizing, impeller changes and other needs. No matter what issue your ski may have we can handle it for you. Unlike a dealership with a HUGE backlog, Goped Garage can get you in without an appointment and back on the lake quickly and for a FRACTION of the cost! We service all makes and models of jet skis using only High Quality and O.E.M. parts. All inspections at Goped Garage are FREE of charge. Inspection and servicing of all components is vital to the operation of your watercraft! **Tune-ups** ** Recommended every 30 hours of ride time ** Tune-up includes: Replacing Spark Plugs, Compression Test, Grease PTO (Power Take Off), Carburetor Adjustments, Time Oil Injection system (if applicable), Oil Change with Filter Change (if applicable), Change Oil Injection Filter (if applicable), Center Steering controls, complete visual Inspection (pump drive, loose Bolt, Wires...ect.) Top off Fluids and a Complementary Jet Ski Wash. **Jet Pump Service** Sea Doo PWC’s and Boats are required to have their jet pump serviced on a regular basis. Sea Doo Jet Pumps have a sealed, oil-filled impeller shaft which requires a pressure test and oil change every 30 to 50 hours. Failure to have this service performed regularly results in costly repairs. **Hydro Lock Removal:** Hydraulic lock or hydro lock occurs when liquids, typically water, enter an engine’s cylinder. You can hydro lock a PWC engine by flipping or sinking a machine in the water and then cranking the engine several times trying to start the engine. This process will bring water up the exhaust system filling the crankcase with water. Since water does not compress, the engine becomes locked up. The best way to remove a hydro lock is to take it to a qualified service center to have it properly removed. If not handled properly, water ingestion will cause internal corrosion which results in premature engine failure. **Winterizing:** It is recommended to winterize all watercraft. Winterizing is the process of removing water from cylinder, block and exhaust system to prevent rust and/or corrosion. This process also includes fogging cylinders with oil to prevent corrosion and rust, along with disabling the electrical system to prevent starting until you are ready to De-winterize. **De-Winterizing:** De-winterizing is the process of enabling the electrical system, charging the battery, running a compression test on engine, and test firing to ensure an easy start all summer long. **Carburetor Rebuilds:** personal watercraft carburetor rebuilds vary depending on application. Kit charges and replacement parts will apply. **Engine Service:** Major engine rebuilds or replacement is available for all Personal Watercraft. Repairs and diagnosis are available for all PWC makes and models. Down time varies depending on availability of parts. CONTACT us with any questions Goped Garage (408)490-4211 425 W. San Carlos st. San Jose Ca, 95110 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
